Sliding door for cold rooms 240 S

Sliding door without frame, with light sliding system, for cold rooms at a positive temperature.

  • Blade thickness: 68 mm.
  • Polyurethane density: 40 Kg/m³

USE

Suitable for cold rooms used for the preservation, processing and seasoning of foods at a positive temperature (0°C minimum).
The 240 S doors are mainly used in: plants for the meat processing, cheese factories, deposits for the preservation of fruit and vegetables, slaughters, food warehouses, shops (delicatessen, fish shops, ice cream parlour...), plant for the fish transformation, ice cream industry.

Standart Blade

  • Blade edge in anodized aluminium (thickness 68 mm);
  • Blade covered with plastic-coated metal sheet colour RAL 9010, thickness 5/10;
  • Fixed side handle;
  • Plastic deep-set inside handle;
  • Double density EPDM gasket on 3 sides;
  • Lower gasket in PVC.

Frame system

  • Without frame, flush panel;
  • Flush floor threshold S/3 (without threshold);

Sliding system

  • The light sliding system is made of:

1. Upper rail made of an aluminium aluminium profile with 2 semi-cut (incisions deforming the aluminium without removing the material) in order to have 2 falling ramps;
2. Two travel-stop at the ends of the rail reduce the impact on the closing and the opening side of the door;
3. Cover made of a folded metal sheet with 2 plastic heads at the ends;

  • Lower rail made of an "U" aluminium profile fixed on the lower edge of the blade, floor side, by means of rivets.

Blade/panel

  • Aluminium pulleys adjustable in height and dept;
  • Registro Adjustable ground register, by means of which the door slides along the lower guide;
  • Lower closing hook: it's made of plastic and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame;
  • Striker of the lower closing hook: it's made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

Standard dimensions

  • Up to 1500 x 2500 mm.