Sliding door for cold room at a medium temperature (up to 0°C minimum), with patented sliding system "Mirror" model with
the addition of 2 fixed hatches for the meat-rail passage.
  • Blade thickness 68 mm.
  • Polyurethane density: 40 Kg/m³.

Suitable for cold rooms used for the preservation, the transformation and the seasoning of foods at a positive temperature (0°C minimum). They are used only in slaughters and plants for the processing of cold meat.

 Bīdāmās durvis 450 PGV

Blade

  • Blade edge in anodized aluminium (thikness 68 mm);
  • Blade covered with plastic-coated metal sheet for food application colour RAL 9010, thickness 5/10 mm;
  • Outside handle: flexible for doors up to dimensions 1600x2500 mm; lever for doors having dimensions included between 1650x2500 mm and 2500x3000 mm (maximum dimension available);
  • Inside handle: " plastic deep-set "plastic deep-set"for doors up to dimensions 1600x2500 mm; lever for doors having dimensions included between 1650x2500 mm and 2500x3000 mm (maximum dimension available);
  • Double density EPDM gasket on 3 sides;
  • PVC lower gasket.

Frame system

  • Frame and side-frame "L" 110/60 in PVC colour RAL 9010; the frame is thermo-welded (45°) up to a thickness equal to 160 mm, beyond such thickness it's assembled (90°) with joints;
  • Counter-frame in PVC, colour RAL 9010, thermo-welded (45°);
  • With the addition of 2 fixed hatches for the meat-rail passage;
  • Flush floor threshold S/3 model (without threshold).

Sliding system

  • The rear guide is made of:

1. Aluminium profile: assures the perfect straight sliding of the blade during the opening and the closing;
2. Clamp: thanks to its sloping level it assures the hermetic closing of the combination door / frame;
3. Closing cap for the aluminium profile: it avoids the accumulation of dirt.

  • The patented "Mirror" sliding system is totally symmetrical and doesn't need any adjustment to change the opening way, it's made of:

1. Sliding profile in extruded anodized aluminium, with anti-fall section
2. Ramps, or falling bends, assuring a perfect contact between the door and the frame they provide the best insulation between the inside and the outside of the cold room. They are assembled on the closing side of the door;
3. Cover (option), made in extruded anodized aluminium it can be simply opened thanks to the hinges assembled on its top, to realize inspection or cleaning services.

Blade/frame system

  • The pulleys, which are replaced by the "swan neck" at the top of which are mounted apposite pulleys;
  • Adjustable rear register, by means of with the door slides along the rear guide;
  • Lower closing hook: it's made of plastic and assembled on the closing side of the frame and during the closing it assures the hermetic contact between the door and the frame;
  • Striker of the lower closing hook: it's made of plastic and assembled on the blade, on the handle side. During the closing of the door it goes into the lower hook and assures the hermetic contact between the door and the frame.

Standard dimensions one blade version

  • Up to 2500x3000 mm.